OL-1

* Machine shown with optional equipment. Actual product appearance may differ.

OL-1 Product Overview

Office Lathe; 1" (25 mm) bar, 4.95" (126 mm) swing over table, 12" x 8" (305 x 203 mm) travels (xz), 7.5 hp (5.6 kW) 6000 rpm, 5C collet spindle, auto air collet closer, C axis, spindle orientation, 1 MB program memory, 15" color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 12- month warranty. 195-254 VAC 50-60Hz, single-phase power only, with NEMA L6-20P plug. Includes 2 each 3/4" bore toolholder blocks (3 ID bores per block or 6 total), 2 each 5/8", 1/2", 3/8" to 3/4" bushings.

OL-1 Dimensions OL-1 Datasheet Shipping Dimensions Electrical Requirements

OL-1 Specifications

SWING DIAMETER	S.A.E.	METRIC
OL-1 - $44,995.00
Over Table	4.95 "	125.7
Over Cross Slide	11 "	279 mm
CAPACITIES	S.A.E.	METRIC
Chuck Size (max)	4 "	102 mm
Max Cutting Diameter (varies with turret)	4.95 "	125.7 mm
Bar Capacity	1.06 "	26.9 mm
T-Slot Table	10 x 20	254 x 508 mm
TRAVELS & FEEDRATES	S.A.E.	METRIC
X Axis	12 "	305 mm
Z Axis	8 "	203 mm
Rapids on X	757 in/min	19.2 m/min
Rapids on Z	757 in/min	19.2 m/min
Max Thrust X	1149 lb	5111 N
Max Thrust Z	1149 lb	5111 N
Max Cutting	500 in/min	12.7 m/min
SPINDLE	S.A.E.	METRIC
Max Rating	7.5 hp	5.6 kW
Max Speed	6000 rpm	6000 rpm
Max Torque	6.7 ft-lb	9.1 Nm
Collet size	5C	5C
Spindle Bore �	1.25 "	31.8 mm
GENERAL	S.A.E.	METRIC
Air Required	1 scfm, 40-70 psi	28 L/min, 2.8-4.8 bar

go to top